Copper Electrolytic Equipment

Equipment for Copper Refinery

There are the Equipment for copper refinery which developed by Mitsubishi Materials for their own smelters. These Equipment were supplied to Japan and other countries smelter. The handling apparatuses are as follows.

Please note that these equipment are only available for handling in Japan.

List of Equipment

Starter Sheet Stripping Equipment

This equipment is designed to strip off copper sheets (starting sheets) from any type of mother blank.

Automatic Loop Slitting Machine

It is a machine to slit into a copper piece of the specific size which called "the loop" from a copper sheet. The loop is to connect a starting sheet and suspension bar.

Starting Sheet Preparation Machine

It is a machine to assemble the loop and suspension bar to a starting sheet. The starting sheet is enhanced verticality in the cell by embossing press.

Anode Lug Press & Spacing Machine

It is a machine to reform anode lug by the anode lug press in order to improve the anode verticality.

Anode Scrap Washing & Unloading Conveyor

It is a machine to wash off the anode scrap by hot water spray with high pressure for removal of electrolyte and slimes remaining on the surfaces.

Cathode washing & Stacking Machine

It is a machine to wash off the cathode by hot water spray for removal of electrolyte on the surfaces.

Automatic Sheet Polishing Machine

It is a machine to polish the surface of the mother blank. The intensity of polishing, the size of the area to be polished, and the desired smoothness/coarseness can be selected by the operator.

Contact Us

Technical Sales And Purchase Dept.
Tel. +81-3-5289-4004 Fax. +81-3-5289-4007 Inquiry Form

PAGE TOP